Paint is designed for the modeler. Tru-Color
is a solvent based paint with an acrylic polymer used as the
binding agent which adheres very well to plastic or metal
models, when those models are properly prepared.
pigments and/or dyes used to produce the correct colors are very
finely ground so that they do not clog air-brushes.
is designed to be air-brushed without the need for thinning.
Suggested clean-up of the air-brush equipment is with acetone.
insure proper adhesion for plastic models - wash the model in mild
soapy water to remove residual processing oils and dirt, rinse
thoroughly with clean water and let dry or use a lint free cloth to
dry. It is now ready to be painted. For metal models (brass for
example), sand blast or treat the metal surface in some fashion to
give Tru-Color Paint a prepared surface to adhere to. Then use our
Primer, Tru-Color Paint 007, and spray paint the model, allow
sufficient drying time and then paint the model with the desired